How To Clean Cast Stone Fireplace References. Wear rubber gloves and eye protection at all times. If the cast stone product surface has become soiled, you may use a solution of 1 part mild detergent, such as 409, with 3 parts warm water.
Rinse the hearth with a clean sponge dipped in water. Stubborn stains may resist this gentle cleaning process. This technical bulletin addresses generally accepted practices, methods and general details for the use of architectural cast stone.
Table of Contents
Using Fresh Water, Thoroughly Rinse The Stone’s Surface To Remove Any Chemical Residue Or Free Sand Immediately After Cleaning And Before It Is Allowed To Dry.
From stone to stone, characteristics can vary greatly regarding aggregates, color added, etc. Using a bottle of water with a spray attachment, wet the stone lightly and then apply the acid in accordance with the manufacturer’s instructions. Wet the stone first, then gently scrub smoke and soot marks.
Next, Spray The Fireplace With Water And Wash It With An All.
This technical bulletin addresses generally accepted practices, methods and general details for the use of architectural cast stone. To clean a stone fireplace, start by using a broom and dustpan to sweep up any ash and dust. During this process, you may notice some stains that haven’t been removed by the detergent.
Clean By Dipping Your Scrub Brush In The Soap Bucket And Then Scrubbing The Stone With The Wet Brush.
Using fresh water, thoroughly rinse the stone’s surface to remove any chemical residue or free sand immediately after cleaning and before it is allowed to dry. Steps to clean the stone: Stubborn stains may resist this gentle cleaning process.
Using Harsh Chemicals Can Sometimes Damage The Stone, And When You Read The Back Of Many Commercial Cleaning Ingredients You Will Notice The Flammable Label.
It could lead to corrosion over a period of time. If the cast stone product surface has become soiled, you may use a solution of 1 part mild detergent, such as. Dip a soft sponge or cloth into some slightly soapy water:
After Scrubbing Several Stones, Dip A Towel In The Clean Water Bucket And Wring It Until It Doesn't Drip Water.
Gently scrub the area and immediately rinse with clean water. While wet, spray on the muriatic acid, taking care to cover the entire area being cleaned. Manufactured stone is extremely fragile, and cleaning experts always are cautious when recommending how it be cleaned.